document number: 60091 for technical questions, contact: thinfilm@vishay.com www.vishay.com revision: 27-jan-10 123 high value precision sip hvps vishay thin film schematic features ? high nominal precision resistors (value range 50k to 10m) ? highly accurate re sistance tolerance (up to 0.01 %) ? conformal coating flame resistant (ul 94 v-) rating ? ultra low tcr ( 5 ppm/c) ? high voltage ? flame resistant (ul 94 v-0 rating) ? high voltage rating to 300 v ? compliant to rohs directive 2002/95/ec applications ? precise instrumentatio n (medical, test etc.) ? precision amplifiers 12 standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number 2- resistance range 50 000 to 5000 k (hvps1) - 100 000 to 10 000 k (hvps2) tcr: absolute 5 ppm/c to 25 ppm/c - 55 c to + 125 c tcr: tracking -- tolerance: absolute 0.01 % to 1.0 % maximum at + 70 c tolerance: ratio -- power rating: resistor 125 mw (hvps1) - 250 mw (hvps2) power rating: package -- stability: absolute r 0.05 % 2000 h at + 70 c stability: ratio -- voltage coefficient < 1.0 ppm/v - working voltage 250 v (hvps1) - 300 v (hvps2) operating temperature range - 55 c to + 125 c - storage temperature range -- noise < - 30 db - thermal emf < 0.1 v/c - shelf life stability: absolute r 0.01 % 1 year at + 25 c shelf life stability: ratio -- * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com for technical questions, contact: thinfilm@vishay.com document number: 60091 124 revision: 27-jan-10 hvps vishay thin film high value precision sip dimensions and imprinting in inches and millimeters mechanical specifications resistive element passivated nichrome substrate material alumina body epoxy coated terminals copper alloy tin/lead option sn60 - sn63 lead (pb)-free option sn96.5, ag3.0, cu0.5 tin/lead and lead (pb)-free finish hot solder dip global part number information new global part numbering: hvps1e1003qbx global model (3 or 4 digits) tcr resistance tolerance packaging hvps1 hvps2 (tin lead) hvps1s hvps2s (lead (pb)-free) (e1) e = 25 ppm/c d = 15 ppm/c y = 10 ppm/c z = 5 ppm/c first 3 digits are significant figures. last digit specifies the number of zeroes to follow. a = 0.05 % b = 0.1 % d = 0.5 % f = 1.0 % q = 0.02 % t = 0.01 % bx = conductive foam box e.g.: 1001 = 1k 1002 = 10k 1005 = 10m historical part number example: hv ps1e5004b (for reference purposes only) hvps1 e 5004 b series tcr characteristics resistance tolerance part n o: datecode 0.02 0.005 (0.508 0.127) 0.100 typ. (2.54) 0.125 min. (3.175) 0.260 max. (6.604) 0.110 max. (2.794) 0.240 max. (6.096) 0.010 (0.25) part n o: datecode 0.200 typ. (5.08) 0.02 0.005 (0.508 0.127) 0.125 min. (3.175) 0.110 max. (2.794) 0.260 max. (6.604) 0.320 max. (8.128) 0.010 (0.25) hvps1 hvps2 vps2 y2 0 s h 3tb 0 x vps1 e1 0 h 3qb 0 x
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
